Exact GPU / case compatibility

Does Sapphire PURE Radeon RX 9070 XT fit in Cooler Master MasterBox TD500 Mesh V2?

Likely fits. Likely fits in the default no-front-radiator check. Length margin 90mm, side/cable margin 41.8mm and thickness margin 23.4mm.

This page checks the exact GPU against the selected case with no front radiator installed. Use the interactive calculator to add your cooling hardware.

Open this exact build in FitMyPC GPU details Case details

Compatibility calculation

Check	Available	Required	Result	Data confidence
GPU length	410mm case limit	320mm GPU	PASS · 90mm	Manufacturer verified
Height + power cable	190mm case envelope	148.2mm (120.2+28)	PASS · 41.8mm	FitMyPC estimate
GPU thickness	85mm case envelope	61.6mm GPU	PASS · 23.4mm	FitMyPC estimate

Some case clearance fields used by this result are estimates, so treat a pass as a likely fit rather than a manufacturer guarantee. A front radiator can reduce available GPU length and change this answer.

Sapphire PURE Radeon RX 9070 XT manufacturer data

Dimensions stored by FitMyPC: 320 × 120.2 × 61.6mm. Power connector: 2 x 8-pin PCIe.

Manufacturer source checked

Verified fields: length, height, thickness, connector

SAPPHIRE publishes 320×120.25×61.6mm and two 8-pin power connectors.

Official manufacturer source ↗

Checked 2026-08-29

Cooler Master MasterBox TD500 Mesh V2 manufacturer data

GPU length limit stored by FitMyPC: 410mm. Side-panel and thickness envelopes are displayed separately because manufacturers do not publish these consistently.

Manufacturer source checked

Verified fields: maxGpuLength, radiatorSupport.front, radiatorSupport.top

Cooler Master specifies 410mm graphics-card clearance with up to 360mm front and top radiators; recommended top radiator thickness is 55mm.

Official manufacturer source ↗

Checked 2026-08-29

What can change the result?

Front radiator/fan thickness, vertical mounting, drive cages, brackets, connector orientation, motherboard layout and product revisions can affect real-world fit.