Exact GPU / case compatibility

Does Sapphire NITRO+ Radeon RX 9070 XT fit in be quiet! Pure Base 500DX?

Likely fits. Likely fits in the default no-front-radiator check. Length margin 38.2mm, side/cable margin 25.5mm and thickness margin 19.3mm.

This page checks the exact GPU against the selected case with no front radiator installed. Use the interactive calculator to add your cooling hardware.

Open this exact build in FitMyPC GPU details Case details

Compatibility calculation

Check	Available	Required	Result	Data confidence
GPU length	369mm case limit	330.8mm GPU	PASS · 38.2mm	Manufacturer verified
Height + power cable	190mm case envelope	164.5mm (128.5+36)	PASS · 25.5mm	FitMyPC estimate
GPU thickness	85mm case envelope	65.7mm GPU	PASS · 19.3mm	FitMyPC estimate

Some case clearance fields used by this result are estimates, so treat a pass as a likely fit rather than a manufacturer guarantee. A front radiator can reduce available GPU length and change this answer.

Sapphire NITRO+ Radeon RX 9070 XT manufacturer data

Dimensions stored by FitMyPC: 330.8 × 128.5 × 65.7mm. Power connector: 12V-2x6.

Manufacturer source checked

Verified fields: length, height, thickness, connector

SAPPHIRE publishes 330.8×128.5×65.68mm and specifies a 12V-2x6 power connector for this NITRO+ model.

Official manufacturer source ↗

Checked 2026-08-29

be quiet! Pure Base 500DX manufacturer data

GPU length limit stored by FitMyPC: 369mm. Side-panel and thickness envelopes are displayed separately because manufacturers do not publish these consistently.

Manufacturer source checked

Verified fields: maxGpuLength, radiatorSupport.front, radiatorSupport.top

be quiet! specifies 369mm graphics-card length, up to 360mm front and 240mm top radiators.

Official manufacturer source ↗

Checked 2026-08-29

What can change the result?

Front radiator/fan thickness, vertical mounting, drive cages, brackets, connector orientation, motherboard layout and product revisions can affect real-world fit.