Exact GPU / case compatibility

Does ASRock Radeon RX 9070 XT Taichi fit in NZXT H7 Flow (2024)?

Likely fits. Likely fits in the default no-front-radiator check. Length margin 80mm, side/cable margin 24mm and thickness margin 24mm.

This page checks the exact GPU against the selected case with no front radiator installed. Use the interactive calculator to add your cooling hardware.

Open this exact build in FitMyPC GPU details Case details

Compatibility calculation

Check	Available	Required	Result	Data confidence
GPU length	410mm case limit	330mm GPU	PASS · 80mm	Manufacturer verified
Height + power cable	200mm case envelope	176mm (140+36)	PASS · 24mm	FitMyPC estimate
GPU thickness	85mm case envelope	61mm GPU	PASS · 24mm	FitMyPC estimate

Some case clearance fields used by this result are estimates, so treat a pass as a likely fit rather than a manufacturer guarantee. A front radiator can reduce available GPU length and change this answer.

ASRock Radeon RX 9070 XT Taichi manufacturer data

Dimensions stored by FitMyPC: 330 × 140 × 61mm. Power connector: 1 x 12V-2x6.

Manufacturer source checked

Verified fields: length, height, thickness, connector

ASRock publishes 330×140×61mm, 3-slot size and one 12V-2x6 connector.

Official manufacturer source ↗

Checked 2026-08-29

NZXT H7 Flow (2024) manufacturer data

GPU length limit stored by FitMyPC: 410mm. Side-panel and thickness envelopes are displayed separately because manufacturers do not publish these consistently.

Manufacturer source checked

Verified fields: maxGpuLength, radiatorSupport.front, radiatorSupport.top

NZXT lists 410mm GPU length, up to 420mm front radiator and up to 360mm top radiator.

Official manufacturer source 1 ↗ · Official manufacturer source 2 ↗

Checked 2026-08-29

What can change the result?

Front radiator/fan thickness, vertical mounting, drive cages, brackets, connector orientation, motherboard layout and product revisions can affect real-world fit.